X-PRO 40cc Dirt Bike Gas Powered 4 Stroke Kids Mini Pit Bike Off Road Disc

X-PRO  40cc Dirt Bike, Gas Powered 4 Stroke Engine Signle Cylinder Kids Mini Dirt Pit Bike,  10" Wheels, Pull Start,  Chain Transmission, Disc Brakes, Off Road Motocycle! This 40cc Dirt Bike is not legal for sale in California, so it can not be shipped to CA address! Great for a beginner and small children, the smaller engine offers a smooth and steady acceleration that won't be too fast or too mach to handle for your small child. Product Feature: If you are in the market for a small dirt bike then the 4-stroke dirt bikes are your best choice. The small 4-stroke dirt-bikes are perfect for beginner use. However, it is also a fun bike for young riders who already know how to ride and it would be a great foundation for a pit-racer or backyard-track bike. It is a TON of bike and performance for the dollar.
The 4-stroke engines have proven to be more reliable and durable than the 2-stroke engines. Chain Transmission and Pull Start provides much easier control and handling for young riders and gives the rider the great convenience in the event of a stall. Additionally with the 4-stroke you get: More torque:
In general, 4 stroke engines always make extra torque than 2 stroke engine at low RPM. More fuel efficiency:
4 stroke engines have greater fuel efficiency than 2 stroke ones because fuel is consumed once every 4 strokes. EPA Approved:
As power is generated once every 4 strokes & also as no oil or lubricant is added to the fuel; 4 stroke engine produces less pollution. More durability:
We all know that more the engine runs, quicker it wears out. 2 stroke engines are designed for high RPM. If an engine can go for 10000 rpm’s before it wears out; a 4 stroke engine with 100 rpm will run for 100 minutes than the other 2 stroke engine which has a higher rpm of 500 & will run for only 20 minutes. No extra addition of oil:
Only the moving parts need lubrication intermediately. No extra oil or lubricant is added to fuel Starter Bike:
you're better off going too small rather than too big if safety is your biggest concern.
Powerful 40cc motor puts out strong, predictable power! Single cylinder, 4-stroke, air cooling.
40cc engine powerful than regular 50cc engine. Max speed:
22 mile/h.
Front and Rear Disc brakes supply strong, reliable stopping power.
2.5-10 Front and Rear tires offer great traction. Off Road Use Only. X-PRO Zephyr 40cc Dirt Bike Assembly Video:   https://youtu.be/bwJ9hPe2cJ0     Kindly Remind: Make sure that all mounting screws and bolts on this dirt bike are tightened before riding. Specifications: Model Number DB-Z006 Engine/Drive Train Motor 40cc, 4-stroke, air cooling, single cylinder Transmission Chain Start type Pull start Max Speed 22 mile/h Tank capacity 1.7L Frame /Body/ Suspension / Brakes Front Brake Disc Rear Brake Disc Front Tire 2.5-10 Rear Tire 2.5-10 Capacities / Dimensions Max.Load(lbs) 100 Net Weight (lbs) 46 Gross Weight (lbs) 59 Carton dimension(inches) 44*13*24" Seat Height(inches) 25.92" Upon receiving your vehicle (and after reviewing the video) we recommend that you heed the following tips:

Perform your first

oil change

by replacing the Engine oil with 10W40 motor oil prior to starting. Always remember to check your oil level. It’s better to use fresh unleaded gas. Put in some stabilizer if you choose to use stock gas.

Always remember to check and

tighten all bolts

before you ride for safety.

Make sure

kill switch

on left handle bar is OFF. If the kill switch is engaged, the unit will not start. The vertical white line on the switch should be DOWN.

Make sure

ignition key switch

is turned to the ON position. If the ignition key is in the OFF position, the unit will not start.

Make sure the

fuel valve

on the carburetor is in the ON position. If it is in the OFF position, there will be no gas flow and the unit will not start.

Make sure the

choke

on the carburetor is in the UP position when you try to start this bike. Turn the choke off after the engine gets warmed up enough.

Lightly tug on the

pull starter

cord to start. Pull a little bit when you feel resistance and then reset and pull again.

Always make sure the front and rear chain sprockets are on a straight line. And then

adjust the chain

to proper tension if necessary.

Please

fully release the throttle grip

before you hold the brake lever. If you twist the throttle grip and hold the brake lever at the same time, the clutch will be locked and engine will not move again.

If you have any questions or issues, just feel free to contact us, we are always here to help. Thank you!

Warranty Warranty includes 30 Days for replacement of defective parts for all Manufacturer's defects. All replacement parts will be sent out within 5-14 business days. Assembly Require Please note that your purchase will not be ready-to-ride and you will need to do some assembly first. Due to the fact these vehicles are factory-direct, there are also break-in procedures required to ensure the unit will work properly after assembly. We recommend that you do an initial break in for 25 miles(speed under 30 mph, revs under 4000 rpm) using the shipping oil that comes with the bike. Shipping Damage Policy Please be sure to inspect the vehicle thoroughly BEFORE signing the delivery receipt. Any damages or missing parts MUST be noted on the delivery receipt and have the driver sign in acknowledgement. We do not accept any damage report without signature on delivery receipt. 1) If the damage is simply a few scratches or cracked plastic part(s), you can accept it and we'll send you replacement parts free of charge after we receive your complete supporting documents for the claim. You must notify us within 2 days of delivery. 2) If you believe that the vehicle has more than just cosmetic damages and is totally destroyed during transit, please sign the "refuse due to damage" on the delivery receipt, and inform us immediately. Return Policy Return will be only accepted in original package with non-assembly & non-used condition. Any return will be applied 20% restocking fee. Buyer should be responsible for original and return shipping cost.